CW MOD switch on LS-1310/1550 | Fluke Networks

Base de conocimientos

Inicio de KB   >  Comprobación de la fibra óptica   >  DSP-FTK

CW MOD switch on LS-1310/1550

Product is no longer manufactured.

For testing the loss on single mode fiber, use the CW selection. CW stands for "Continues Wave" which is used for optical loss or output power measurements. MOD stands for "Modulated" which is used for identifying fiber cables with a fiber identifier. The MOD setting modulates the source output at 2 kHz. To change the switch position, pull out on the switch arm; then move the switch.

Autor: Fluke Networks

Fecha de creación: 27-2-2014

Última modificación: 27-2-2014

Powered By OneLink