Adapter Usage in the OMNIScanner | Fluke Networks

Base de conocimientos

Inicio de KB   >  Pruebas de cobre   >  OMNIScanner™

Uso del adaptador en el OMNIScanner

The last OMNIScanner left the factory back in July 2005. We regret to say service and support ended July 2009. It's replaced by the Versiv familly of testers.

Adapter Usage is a function in the OMNIScanner which tracks the number of tests each adapter (Link Adapters, Channel Adapters, and Fiber Adapters) has been subjected to.
Highlighted Project NameHighlighted Set ReferenceHighlighted Set Reference
From the Main Screen Press the Setup button Setup button in OMNIScanner. Use the Next Page button Next Page button in OMNIScannerto go to the second Setup screen. Select #2 Adapter Usage.
Adapter Usage First ScreenAdapter Usage Second ScreenAdapter Usage Third Screen
The screen will display the number of tests that are run on each of the attached adapters.
For anyone troubleshooting Adapter failures, it will show the number of tests that have been run on the adapter and give an indication as to its age and whether it needs replacing.

Autor: Fluke Networks

Fecha de creación: 26-2-2014

Última modificación: 26-2-2014

Powered By OneLink