Loss Measurements on 8- and 10-Fiber Cables - MultiFiber Pro

The meter lets you set a reference and measure loss on MTP/MPO cables made for 40G and 100G standards:

 

  • On 40G cables, the four middle fibers are dark. On 100G cables, one fiber on each side of the connector is dark.
  • When the meter sees the 40G or 100G configuration, it does not show information for the dark fibers.
  • The meter saves loss measurements for only the 8 or 10 other fibers.

Productos relacionados

                

                   

Configurador del kit de Versiv

                   

¿Cómo usarás tu Versiv?